How To Fit A Washing Machine

Looking to install your new washing machine but not sure where to start? Look no further! Our comprehensive guide has got you covered, from disconnecting your old machine to connecting your new one. We even provide tips on fitting a door on integrated models. And if you don't want to do it yourself, opt for our installation service and we'll take care of it all for you. Get your laundry room up and running in no time with our easy-to-follow instructions.

Disconnecting a washing machine may seem like a daunting task, but with the right tools and guidance, it's a breeze. Here's a clear and concise guide to help you safely and efficiently disconnect your appliance.

What you'll need:

• Towel
• Bucket
• Pliers or wrench
• Blanking disc/cap (available at your local hardware shop)

Step 1: Unplug the appliance

Start by carefully unplugging your washing machine from the power socket. You should also turn off the water supply and prepare a towel and bucket.

Step 2: Disconnect the hose pipe from the machine

Remove the blue water hose pipe from the back of the machine, tipping any remaining water into your bucket.

Step 3: Disconnect the hose pipe from the wall

Using pliers or a wrench, remove the water hose from the wall, emptying any remaining water into your bucket.

Step 4: Remove the drain hose

Take out the drain hose from the waste pipe under your sink and pour out any wastewater.

Step 5: Cap off the water pipe

Securely screw the blanking cap onto the water pipe to prevent any leaks.

That's it - you have successfully disconnected your washing machine! By following these steps, you can ensure a smooth and stress-free process.

Discover How to Install Your New Washing Machine in Just a Few Steps

Say goodbye to your old washer and hello to a fresh and clean start by following our simple installation guide. Learn how to connect your new washing machine to the cold water supply, wastewater down pipe, and power source. We'll walk you through each step, including removing the old appliance and leveling the new machine. With our expert tips, you'll be up and running in no time. Get your laundry room ready for action and start enjoying fresh, clean clothes right away!

 Just follow these simple steps:

1. Uninstall the old washing machine using our guide above.
2. Remove the transit bolts from your new washing machine.
3. Attach the cold water-in-pipe to the back of your machine and to your cold-water supply.
4. Connect the wastewater hose to the back of your machine and feed it into the wastewater down pipe.
5. Plug in the machine and ensure it's level using a spirit level.
6. Start your first load and enjoy your newly installed washing machine.

With these instructions, you'll have your washing machine up and running in no time.

How to Install a Door on Your Integrated Washing Machine in 6 Easy Steps

To fit a door on your integrated washing machine, all you will need is the fixings and template that come with your new appliance, a pencil, and a drill. To get started, make sure you have the necessary kit that's supplied with your new washing machine, including the template. Here are the simple steps to follow:

1. Check Your Kit: Ensure you have all the essential parts included with your appliance.
2. Mark the Top: Hold the furniture door in place where you want to install it and mark the top of the machine with a pencil.
3. Line up the Template: Place the hole template on the back of your furniture door, ensuring it is the right way up and lined up with the top edge of your appliance.
4. Drill the Holes: Mark and drill the relevant holes for the fixings to the door and ensure it opens in the direction you desire.
5. Attach the Hinges: Attach the hinges and small metal magnet strips on your furniture door and appliance.
6. Fit the Door: Screw the hinged door into the access points on the front of the machine and enjoy your newly installed integrated washing machine!

Frequently Asked Questions about Washing Machine Installation 

Looking to install a new washing machine, but have some questions? Here are some common inquiries and their answers: 

• What's the installation cost? Our installation service starts from just £25 for freestanding models and £70 for integrated models. 
• Why is integrated installation more expensive? Our installation experts take extra care to ensure that your furniture door fits correctly on your new machine, which takes more time and effort than freestanding models. 
• How do I install a limescale magnet? Screw it onto the water inlet pipe, then attach it to your appliance's water connection.
• What are transit bolts? These bolts hold the drum in place during transportation to prevent any damage. If you choose our connection or installation services, we'll remove these bolts for you. 
• Can you remove transit bolts for me? We'll take care of transit bolt removal if you choose our connection or installation services.
• Do I need a hot and cold-water tap? No, only a cold-water connection and drain connection are necessary.
• How long does installation take? It varies based on your setup. The time can vary depending on your home and kitchen setup. 
• Can I reverse the door on the washing machine? Most machine doors can't be reversed, but check your manual to be sure. 
• Do hoses come with my machine for connection? Yes, they do - you'll find them inside the drum of your new machine. 
• Will you test cycles when you install my machine? Absolutely - we'll make sure your machine is up and running as part of our installation service. 
• Can you recycle my old machine? Choose our remove and recycle service, and we'll take it away to be properly recycled.

Choose our installation services to make sure your washing machine is set up correctly and efficiently.