Back to Top
How To Fit A Hob
Step-by-Step Guide to Installing Your Hob
Want to install a new hob but not sure how to tackle it? Our comprehensive guide covers all types of hobs—from gas and electric to ceramic and induction. We'll walk you through the essential steps of measurement, preparation, and installation. We also highlight which parts of the job require professional certification for safety and legal compliance. For a completely hassle-free experience, our professional installation service is just a click away.
How to Fit a Hob
Fitting a hob can really elevate your kitchen—but getting it installed correctly is essential for safety and performance. Whether it's gas, electric, or induction, here's what you need to know about fitting a hob and when to call in the pros.
Know Your Hob Type
- Gas Hob – Offers instant heat and control, requires a Gas Safe registered installer.
- Electric Solid Plate – Traditional, easy to use, needs a secure electrical connection.
- Ceramic Hob – Sleek and modern with touch controls.
- Induction Hob – Fast and efficient, works with magnetic cookware only.
What You'll Need
- A hob that fits your cut-out size
- Power supply or gas connection
- Screwdriver, sealant, and clamps
- Worktop cut-out prepared to the right dimensions
Step-by-Step Fitting Guide
Measure the Cut-Out
Check the manual for the exact cut-out size. Measure your worktop opening to make sure it's a perfect fit—this helps avoid air gaps and instability.
Check Your Connections
- Electric hobs usually require hardwiring into a dedicated circuit.
- Induction hobs also need a proper fuse rating and circuit setup.
- Gas hobs must be installed by a Gas Safe engineer.
Seal the Edges
Apply heat-resistant sealing tape or silicone around the edge of the cut-out. This helps protect the worktop and keeps the hob stable.
Fit the Hob into Place
Lower the hob into the cut-out carefully, ensuring it sits flush. Use the clamps (usually provided) to secure it tightly underneath the worktop.
Connect to Power or Gas
⚠️ Important:
- All electrical connections must be carried out by a qualified electrician.
- Gas connections must be done by a Gas Safe registered engineer.
Test the Hob
Once connected, run a quick test to make sure each burner or zone works correctly. If it's an induction hob, check that your cookware is compatible.
Safety Notes
- Never DIY a gas installation—it's illegal and dangerous.
- Always follow manufacturer instructions for ventilation and clearance.
- Don't use silicone sealant if the manual recommends against it—it can interfere with heat dispersion.
Want It Installed Properly?
Need a gas hob connected or want your new induction hob wired safely? Our expert engineers are trained and certified to install all types of hobs with precision and care.
Login and Registration Form